The main components and functions of the shot blasting machine for the outer wall of the steel pipe

The shot blasting machine for the outer wall of the steel pipe is composed of a cleaning room, a shot blasting machine assembly, a conveying roller table, a feeding mechanism, a discharging mechanism, a screw conveyor, a hoist, a maintenance platform, a separator, a dust removal system and an electronic control system.

1. The shot blasting machine adopts upward shot blasting arrangement. Since the steel pipes with different pipe diameters are transported on the roller table, the bottom surface is roughly at the same height, the shot blasting machine is thrown from the bottom to the top, and the distance from the projectile to the surface of the steel pipe is basically the same, so pay special attention when selecting models. Be sure to read the machine manual and follow the instructions. Model selection, if necessary, you can consult the crawler manufacturer, because the professional crawler production penalty.

The dust removal system should adjust the gates around the branch pipe to make the wind distribution reasonable, which can enhance the dust removal effect. The dust collector should ensure that the maintenance of small problems on the road is mainly divided into road and road surface, so the tools used are road shot blasting machine and road surface spraying machine. pill machine. The projectile speed of the steel shot reaching the surface of the workpiece is the same, which ensures that the cleaning effect of the steel pipe with different diameters on the surface is the same. Provide the same conditions for subsequent spraying.

2. The workpiece continuously passes through the inlet and outlet of the shot blasting machine. Due to the cleaning of steel pipes with different diameters, in order to prevent projectiles from flying outside,

The shot blasting machine is first composed of four parts: ① The shot blasting machine generally uses a high-speed rotating impeller to project the projectile to a certain direction under the action of high centrifugal force.

During the working process, some shot blasting machines can swing at a certain angle or move up and down. ② projectile collection, separation and transportation system. ③ The carrier that makes the casting run and turn intermittently during the shot blasting cleaning process. ④ Dust removal system. Sandblasting room: no deep pit (or no pit), low infrastructure cost and short construction period. The mechanical tools of shot blasting cleaning machine are firstly composed of shot blasting machine, wear-resistant rubber belt, auger, lifting, separator, feeding conveying, dust removing machine and cleaning equipment.

The characteristics of the shot blasting machine for the inner wall of the steel pipe: 1. The operation is simple and the production efficiency is high. This machine adopts multi-layer replaceable sealing brushes to achieve complete sealing of projectiles.

3. The centrifugal cantilever type novel, high-efficiency and multi-functional shot blasting machine is used, with large shot blasting capacity, high efficiency, rapid blade replacement, overall replacement performance, and convenient maintenance.

4. The full-screen type BE type shot and slag separator is adopted, which greatly improves the separation amount, separation efficiency and shot blasting quality, and reduces the wear of the shot blasting device.